Aiwa CSD-MD50 Manuel de service télécharger pdf (Page 37)

10) Press the MD 2 button to display “FOCUS ON!”.

11) Press the “ENTER” to display “ALL SV ON”, and press the “DISP” button to display “Er00**:0000”.

Check that the value of ### is “20” or less.

12) After the adjustment is completed, press the 9 button to display “ALL SV OFF”.

3-6. UTOC ERASE

Perform the following procedure only when the recorded disc needs to be erased.

1) Insert a disc from which UTOC is going to be erased.

2) Move the pick up to the center with

6 button and 5 button.

3) Press the “TAPE 1 2” button to display “SELECT GRV”.

4) Press the “MD REC” button to display “REC Analog”.

5) Press MD 2 button to display “FOCUS ON!”.

6) Press the “ENTER” button to display “ALL SV ON”.

7) When the “CD ™ MD SYNCHRO RECORDING” button is pressed, “UTOC ERASE” appears on the display and UTOC is

erased.

8) After the erasure is completed, “ALL SV OFF” appears on the display.

SERVICE JIG AND TOOLS

The following jigs and tools can be used.

CD Block

MD Block

Usage

CD mechanism stand

P.U. extension FFC

S.T.I G-98-50

Part No.

SV-J00-018-010

87-CE1-640-010

SV-J00-043-010

Part Name

JIG, P-CD BY TORIKOSHI

FF-CABLE, 16P 1.0 250mm

FFC, 8P-1.0

FFC, 14P-1.0

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 73 74

Pas de commentaire

Aiwa CSD-MD50 Manuel de service Page 37